Ongoing Funded Project Details

Name of the Staff	Funding Agency	Amount Sanctioned	Year of Commencement
Dr. Yadavalli Basavaraj and team	Karnataka council for technological up gradation Govt. of Karnataka	49.75 Lakhs	2014-2015
Prof. Raghavendra Joshi	VGST	9 Lakhs	2014-2015

 

List of Research Students
S.NO	Name of the Research Scholar	Name of the Guide	Designation	Name of the University	Date of registration	Status as on Date Comprehensive Viva/ Submission/ Course Work Completed
1	T.H.Manjunatha	Dr. Yadavalli Basavaraj	Prof.& Head	VTU	Oct – 2-13	Course Work Completed
2	Ravi Shankar Raman	Dr. Yadavalli Basavaraj	Prof.& Head	VTU	Oct – 2-13	50% Course Work Completed
3	Banakar Nagaraj	Dr.V.V.Ramana	Professor	VTU	Dec – 2013	Course Work Completed
4	Lakshmi Kumari		Professor	VTU	Dec – 2014	25%  Course Work Completed
5	Anil Kumar H.M	Dr.V.V.Ramana	Professor	VTU	Dec – 2014	Course Work Completed
6	Shivaramakrishna	Dr.Yadavalli Basavaraj	Prof.& Head	VTU	Oct – 2-14	50%  Course Work Completed
7	Pavan Kumar B.K	Dr.Yadavalli Basavaraj	Prof.& Head	VTU	Oct – 2-15	Not yet appeared for the course work

Publications Of Dr.Yadavalli Basavaraj

2012-13
1	Dr. Yadavalli Basavaraj, Prof.Pavan Kumar .B.K “Modeling And analysis of Piston Rod for Brake Spider Fixture by FEM using Ansys Software”, in the International Journal of Emerging Technology and Advanced Engineering,ISSN:2250-2459,Volume3,Issue3(March2013)PP955-961, www.ijetae.com
2	Dr. Yadavalli Basavaraj, Prof.Pavan Kumar .B.K “Modeling And analysis of Support Pin for Brake Spider Fixture by FEM using Ansys Software”, in the IOSR Journal of Mechanical And Civil Engineering(IOSR-JMCE) e-ISSN:2278-1684,Volume6,Issue1(March-April2013)PP10-15, www.iosrjournals.org
3	Dr. Yadavalli Basavaraj, Prof. Manjunath. T.H “Design Optimization of Automotive Engine Mount System”, in the International Journal of Engineering Science Invention, ISSN (online):2319-6734, ISSN (Print):2319-6726,www.ijesi.org Volume 2,Issue 3 March2013, pp.48-53.
4	Dr. Yadavalli Basavaraj, Dr.Venkataramana, Prof. Banakar Nagaraj “Concurrent Engineering: An effective Engineering Management Strategy”, in the International Journal of Production Technology and Management (IJPTM), ISSN: 0976-6383(Print), ISSN 0976-6391(online), Volume4, Issue1 (January – April 2013) PP.11-16, www.iaeme.com/ijptm.asp. Journal Impact factor (2013): 4.3285 (calculated by GISI)
5	Dr. Yadavalli Basavaraj, Pavan Kumar B.K, Varun B V, Sumanth G “Modeling And analysis of Clamp for Brake Spider Fixture by FEM using Ansys Software”, in the International Journal of Engineering Inventions, e-ISSN: 2278-7461, p-ISSN 2319-6491, Volume 2, Issue10 (June 2013) PP.00-00
2013-14
1	Dr. Yadavalli Basavaraj, Shivaprakash. Y.M, Dr. K. V. Sreenivasa Prasad “Dry Sliding Wear Characteristics of Fly Ash Reinforced AA2024 Based stir Cast Composite” in the International Journal of Current Engineering and Technology(IJCET). ISSN 2277 – 4106, Volume 3, No.3 (August 2013), PP. 911 – 921. Journal Impact factor (2013): 2.55 (calculated by GISI)
2	Dr. Yadavalli Basavaraj, Shivaprakash. Y.M, Dr. K. V. Sreenivasa Prasad “Investigations of ALFA Composite produced by Powder Metallurgy Route” in the International Journal of Earth Sciences and Engineering(IJEE). ISSN 0974 – 5904, Volume 6, No.4(01) (August 2013), PP. 816-820.
3	Dr. Yadavalli Basavaraj, Pavan Kumar B.K “Modeling and Analysis of Base Plate for Brake spider Fixture by FEM using Ansys Software” in the International Journal of Mechanical Engineering Technology (IJMET). ISSN 0976 –6340(Print),ISSN 0976 – 6359, Volume 4, Issue 5 September – October (2013), PP. 26-30. Journal Impact factor (2013): 5.7731 (calculated by GISI)
4	Dr. Yadavalli Basavaraj, Shivaprakash. Y.M, Dr. K. V. Sreenivasa Prasad “Comparative Study of Tribological Characterstics of AA2024+10% Fly ash composite in Non-Heat treated and Heat treated conditions” in the International Journal of Research in Engineering and Technology (IJRET). eISSN 2319-1163,pISSN 2321-7308, Volume 2, Issue 11 (November 2013), available @ http://ijret.org.
5	Dr. Yadavalli Basavaraj, Pavan Kumar B.K, Shivarama Krishna A “Evaluation of Occupant Head Injury during Automotive Interior Head Impact Using FEM Approach” in the International Journal of Science and Research (IJSR). ISSN (Online) 2319-7064, Volume 3, Issue 6 June (2014), PP. 709-711. Journal Impact factor (2012): 3.358
6	Dr. Yadavalli Basavaraj, Manjunath.T.H, Veeresh H “Design and Analysis of Under carriage uplock lever Mechanism of an Aircraft” in the International Journal of Science and Research (IJSR). ISSN (Online) 2319-7064, Volume 3, Issue 6 June (2014), PP. 1150-1153. Journal Impact factor (2012): 3.358
7	Dr. Yadavalli Basavaraj, Pavan Kumar B.K, Gourishankar Hiremath “Analysis of Pedal Operated Wheel Brake System of a Helicopter Using Adams Software” in the International Journal of Science and Research (IJSR). ISSN (Online) 2319-7064, Volume 3, Issue 6 June (2014), PP. 709-711. Journal Impact factor (2012): 3.358.Available at www.ijsr.net
8	Dr. Yadavalli Basavaraj, Pavan Kumar B.K, Prashanth Hiremath “Analysis of Friction Performance  of LM6-SIC Metal Matrix Composite by using Design of Experiments” in the International Journal Mechanical and Industrial Technology (IJMIT). ISSN (Online) 2348-7593, Volume 2, Issue 1 April 2014 – September 2014, Available at: www.researchpublish.com
2014-15
1	Dr. Yadavalli Basavaraj, Naveen Bharadishetter “Design, analysis and development of special purpose tools for Composite Manufacturing efficiency Improvement” in the International Journal of Research in Engineering Technology (IJRET), Volume 4, Issue 7 July 2015.
2	Dr. Yadavalli Basavaraj, Pavan Kumar B.K, Prashanth Hiremath “Analysis of Friction Performance  of LM6-SIC Metal Matrix Composite by using Design of Experiments” in the International Journal Mechanical and Industrial Technology (IJMIT). ISSN (Online) 2348-7593, Volume 2, Issue 1 April 2014 – September 2014, Available at: www.researchpublish.com
3	Dr. Yadavalli Basavaraj, Pavan Kumar B.K, Gourishankar Hiremath “Analysis of Pedal Operated Wheel Brake System of a Helicopter Using Adams Software” in the International Journal of Science and Research (IJSR). ISSN (Online) 2319-7064, Volume 3, Issue 6 June (2014), PP. 709-711. Journal Impact factor (2012): 3.358.Available at www.ijsr.net
4	Dr. Yadavalli Basavaraj, Raghavendra.H “Experimental and Numerical Study of the influence of Volume fraction on Tensile and Flexural Strength of E- Glass Epoxy Cross Ply Laminates” in the International Journal Mechanical and Industrial Technology (IJMIT). ISSN (Online) 2348-7593, Volume 2, Issue 1 April 2014 – September 2014, Available at: www.researchpublish.com
5	Manjunatha T H, Dr. Yadavalli Basavaraj “Investigation on Drilling of Hybrid Metal Matrix Composite”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015
6	ShivaramaKrishna A, Dr.Yadavalli Basavaraj “Fracture Characterization and FE Simulation of Glass Fiber Reinforced Polystyrene Hybrid Polymer Composite.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015
7	Mayur Pawar, Dr. Yadavalli Basavaraj “Development of Hybrid Aluminium Matrix Composite for Brake Disc”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

  Publications Of Dr.V V Ramana

2012-13
1	Dr. V. V Ramana, “Concurrent Engineering: Impact on New Product Design and Development in Indian Two Wheeler Auto Industry”, International Journal of Modern Engineering Research (IJMER) Vol.2, Issue.4, July-Aug. 2012 pp-2699-2701, ISSN: 2249-6645
2	Dr. V. V Ramana, ” Concurrent Engineering in New Product Design and Development “, International Journal of Artificial Intelligence Systems and Machine Learning, CiiT, Coimbatore. ISSN 0974 – 9667 & Online: ISSN 0974 – 9543, Issue November 2012
3	Dr. V. V Ramana,” Factors Affecting the Implementation of Software Project Management in Software Companies “, CiiT International Journal of Software Engineering and Technology. Print: ISSN 0974 – 9748 & Online: ISSN 0974 – 9632, Issue November 2012
4	Dr. V. V Ramana,,”Concurrent Engineering: An Effective Engineering and Management Strategy”, International Journal of Production Technology and Management, ISSN 0976-6383, Volume 4, Issue 1, Jan- April 2013, pp 11-16
2013-14
1	Dr. V. V Ramana, ” Concurrent Engineering: An Effective Engineering and Management Strategy “, International Journal of Production Technology and Management, ISSN 0976-6383, Volume 4, Issue 1, Jan- April 2013, pp 11-16
2	Dr. V. V Ramana, “Indian Two Wheeler Auto Industry and Concurrent Engineering”, International Journal of Engineering Research, Volume 3, Issue 8, August 2013
3	Dr. V. V Ramana,” Performance Analysis of Overall Heat Transfer Coefficient Using Nano Fluids on an Automobile Engine Test Rig “, International Journal of Mechanical Engineering and Robotics Research, ISSN 2278-0149, Volume 2, No. m4, October 2013
4	Dr. V. V Ramana,” Performance Study on Effect of Nano Coatings on Liquid Flat Plate Collector – An Experimental Approach “, International Journal of Mechanical Engineering and Robotics Research, ISSN 2278-0149, Volume 2, No. m4, October 2013
5	Dr. V. V Ramana, “Analysis and Optimization of Laser Beam Weld Bead Parameters: A Proposal”, International Journal of Mechanical Engineering Research and Applications, ISSN 2347-1719, Volume 1, Issue 4, September 2013
2014-15
1	Dr. V. V Ramana, ” An overview of Friction Stir Welding(FSW): A new Perspective “, International Journal of Mechanical Engineering And Science, ISSN 2319-6483, Volume 4, Issue 6, June 2014
2	Banakar Nagaraj, Dr. V. Venkata Ramana, “Research Progress in Laser Welding of Aluminum Alloys”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015
3	Dr. V. V Ramana, “ Comparison of overall heat transfer co-efficient of a nano fluid with water in heat exchanger”, Has been Published In The International Journal of scienve & Engineering, (IJSE)(EISSN:2347-2200)
4	Dr. V. V Ramana, ” Design & Modification of bale cutting machine to improve it’s productivity”, International Journal of Research in Engineering &Technology, eISSN 2319-1163, Volume 4, Issue 8, aug 2015

Publications Of Dr.Ravi V

2013-14
1	Dr. V. Ravi & Prof. Mabusabu, “A Study on Heat Transfer Characteristics Of Ethylene Glycol based nanofluid And Carbon Nanotube (CNT) Mixture In Nucleate Pool Boiling”, International Journal of Mechanical Engineering Research & Applications (IJMERA), ISSN: 2347-1719, www.ijmera.org, Vol. 1 Issue 4, September – 2013.

Publications Of Dr.Raghavendra Joshi

2012-13
1	Joshi, R., Subbarao, M and Kadoli, R. (2012). “Design procedure for optimum efficacy of magnetostrictive material (Tb0.3Dy0.7Fe1.95) in actuator applications.” International Journal of Engineering and Advanced Technology, 2(2), 187-190.
2	Joshi, R., Subbarao, M and Kadoli, R. (2013). “Finite element magnetostatic analysis of Magnetostrictive (Tb0.3 Dy0.7 Fe1.95) actuator with different housing materials” Defence Science Journal, DRDO, 63(4), 423-428.
3	Joshi, R. and Kadoli, R. (2013). “Design and study of magnetization characteristics of a magnetostrictive (Tb0.3Dy0.7Fe1.95) actuator under zero pre-stress conditions for direct current input” Advanced Materials Research, 705, 281-287.
4	Joshi, R. and Kadoli, R. “Energy based Jiles-Atherton and an analytical magnetostrictive model to study response of Terfenol-D actuator to a step input.” Journal of Intelligent Material Systems and Structures. (Under 3rd review)
2013-14
1	Joshi, R. and Kadoli, R. (2014). “ Magneto-mechanical coupled magnetostriction model for Terfenol-D actuator under step input. “ Procedia Material Science, Elsevier Publications, 5, 154-163

 

2014-15
1	Reshma Pa and Raghavendra Joshi “Magnetostrictive Materals: A Review ”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015
2	Amaresh M a and Raghavendra Joshi  “Studies On Vibration Characteristics Of A Lightweight Railway Vehicle Body”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications of Mr.Vishnuprasad

2013-14
1	B Vishnuprasad, B Jaya Prakash and V Venkata Ramana “PERFORMANCE ANALYSIS OF OVERALL HEAT TRANSFER COEFFICIENT USING NANO FLUIDS ON AN AUTOMOBILE ENGINE TEST RIG” in the International Journal of MECHANICAL ENGINEERING AND ROBOTICS Research. ISSN 2278 – 0149, Volume 2, Number 4(2013)
2	B Vishnuprasad, B Jaya Prakash and V Venkata Ramana “Performance Study On Effect Of Nano Coatings On Liquid Flat Plate Collector: An Experimental Approach” in the International Journal of MECHANICAL ENGINEERING AND ROBOTICS Research. ISSN 2278 – 0149, Volume 2, Number 4(2013)
2014-15
1	Vishnu Prasad“Synthesization of Nano fluid and comparison of Overall Heat Transfer Coefficient in a heatExchanger”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015
2	Vishnu Prasad, “ Comparison of overall heat transfer co-efficient of a nano fluid with water in heat exchanger”, Has been Published In The International Journal of scienve & Engineering, (IJSE)(EISSN:2347-2200)

Publications Of Mr.Jayaprakash

2013-14
1	B Jaya Prakash, B Vishnuprasad, and V Venkata Ramana “Performance Study On Effect Of Nano Coatings On Liquid Flat Plate Collector: An Experimental Approach” in the International Journal of MECHANICAL ENGINEERING AND ROBOTICS Research. ISSN 2278 – 0149, Volume 2, Number 4(2013)
2	B Jaya Prakash , B Vishnuprasad, and V Venkata Ramana “Performance Analysis Of Overall Heat Transfer Coefficient Using Nano Fluids On An Automobile Engine Test Rig” in the International Journal of MECHANICAL ENGINEERING AND ROBOTICS Research. ISSN 2278 – 0149, Volume 2, Number 4(2013)
2014-15
1	B Jayaprakash, “Study of Effect of Nano Coatings on Efficiency of Liquid Flat Plate Collectors, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015
2	B Jayaprakash, “ Comparison of overall heat transfer co-efficient of a nano fluid with water in heat exchanger”, Has been Published In The International Journal of scienve & Engineering, (IJSE)(EISSN:2347-2200)

Publications Of Mr. Shrinivasulu

2014-15
1	B Jayaprakash, “Recent Developments In The Field Of SolarWater Heater Using Flat Plate Collector- AReview”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr. Banakar Nagaraj

2014-15
1	Banakar Nagaraj, Dr. V. Venkata Ramana, “Research Progress in Laser Welding of Aluminum Alloys”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February

Publications of Mr.Raghavendra K

2012-13
1	K Raghavendra, Ravi K  “BUCKLING ANALYSIS OF TRACTOR TIE ROD SUBJECTED TO COMPRESSIVE LOAD” in the  International Journal of Mechanical and Industrial Technology.  ISSN 2348-7593 (2014)
2	K Raghavendra, Karabasanagouda .B .N “Frequency Response Analysis of Deep Groove Ball Bearing” in the International Journal of Science and Research (IJSR). ISSN (Online): 2319-7064 (2012).
2014-15
1	Raghavendra K, “Buckling Analysis Of Tractor Tie Rod Subjected To Compressive Load”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Ganesh B

2014-15
1	Ganesha.B, Amaresh.M,Giri Prasad.B, “Experimental design of Air Compressor vibration monitoring by Taguchi Technique”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015
2	Ganesha.B, Amaresh.M,Giri Prasad.B, “ApplicationofTaguchiMethodforDesignofExperimentsinVibration MonitoringofPressurePump”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Manjunatha T H

2012-13
1	Prof. Manjunath. T.H, Dr. Yadavalli Basavaraj, “Design Optimization of Automotive Engine Mount System”, in the International Journal of Engineering Science Invention, ISSN (online):2319-6734, ISSN (Print):2319-6726,www.ijesi.org Volume 2,Issue 3 March2013, pp.48-53
2	Manjunatha T H, R Suresh Kumar, “Wear Prediction Of Mild Steel Coated With Inconel 718 Using Adaptive Neuro Fuzzy Inference System”, in the STLE Annual meeting and exhibition 2013, may 5-9, 2013, Detroit, Michigan, USA
2013-14
1	Manjunath.T.H, Dr. Yadavalli Basavaraj, Veeresh H “Design and Analysis of Under carriage uplock lever Mechanism of an Aircraft” in the International Journal of Science and Research (IJSR). ISSN (Online) 2319-7064, Volume 3, Issue 6 June (2014), PP. 1150-1153. Journal Impact factor (2012): 3.358
2014-15
1	Manjunatha T H, Dr. Yadavalli Basavaraj “Investigation on Drilling of Hybrid Metal Matrix Composite”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Mayur Pawar

2014-15
1	Mayur Pawar, Dr. Yadavalli Basavaraj “Development of Hybrid Aluminium Matrix Composite for Brake Disc”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.PAVANKUMAR B K

2012-13
1	Pavan Kumar B K,Dr.Yadavalli Basavaraj, Varun B V.,Sumanth G., “Modelling and Analysis of clamp Spider Fixture by fem using ansys software”, Has Been Published In The International Journal Of Engineering Inventions, Volume 2, Issue 11, Page.No. 21-24, july 2013
2	Pavan Kumar B K,Dr.Yadavalli Basavaraj, “Modelling and Analysis of piston rod for brake spider fixture by fem using ansys software”, Has Been Published In The International Journal Of Emerging technology and advanced engineering, Volume 3, Issue 3, Page.No. 955-961, march 2013
3	Pavan Kumar B K,Dr.Yadavalli Basavaraj, “Modelling and Analysis of support pin for brake spider fixture by fem using ansys software”, Has Been Published In The International Journal Of Mechanical and civil Engineering, Volume 6, Issue 1, Page.No. 10-15, march-april 2013
4	Pavan Kumar B K,Dr.Yadavalli Basavaraj, ShivaramaKrishna A “Evaluation of occupant head injury during automative interior head impact using FEM approach ”, Has Been Published In The International Journal Of Science and Reaserch, Volume 3, Issue 6, Page.No. 709-711, june 2014
2013-14
1	Pavan Kumar B K,Dr.Yadavalli Basavaraj, “Modelling and Analysis of base plate for brake spider fixture by fem using ansys software”, Has Been Published In The International Journal Of mechanical engineering and technology, Volume 4, Issue 5, Page.No. 26-30, september-october 2013
2	Pavan Kumar B K,Dr.Yadavalli Basavaraj, Prashant Hiremath “analysis of friction performance of LM6-SIC metal matrix composite by using design of experiments”, Has Been Published In The International Journal Of mechanical and industrial technology, Volume 2, Issue 1, Page.No. 28-34, september 2014
3	Pavan Kumar B K,Dr.Yadavalli Basavaraj, gourishankar Hiremath “analysis of pedal operated wheel brake system of a helicopter using adams software”, Has Been Published In The International Journal Of science and research, Volume 3, Issue 6, Page.No. 2651-2653, June 2014
2014-15
1	Pawan Kumar B K, Dr. Yadavalli Basavaraj “I Investigation On Three – Body Abrasive Wear Behavior Of Glass – EpoxyComposite – A Taguchi Approach”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.SHEKAR K

2013-14
1	Shekar K, Vijay Tambrallimath, Adarsh Patil, “Thermal satisfaction in vertical solar water heater tank”, Has Been Published In The International Journal Of Innovztion Science, Engineering & Technology, Volume 1, Issue 3, Page.No. 390-395, May 2014
2	Mahesh B.Gorawar, P.P. Revankar ,Vijay Tambarallimat and Shekar K. 2 d. “Performance Studies on Solar Photovoltaic Thermal System for Crop”, Has Been Published In The Advanced Materials Research Vol 768 (2013) pp 90-97, september 2014
2014-15
1	Shekar K, Shreeharsha B T, Fayaz “Performance studies on Photovoltaic Thermal(PV/T) Air collector.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Shreeharsha B T

2014-15
1	Shekar K, Shreeharsha B T, Fayaz “Performance studies on Photovoltaic Thermal(PV/T) Air collector.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Fayaz

2014-15
1	Shekar K, Shreeharsha B T, Fayaz “Performance studies on Photovoltaic Thermal(PV/T) Air collector.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.SHIVARAMKRISHNA A

2013-14
1	ShivaramaKrishna A Pavan Kumar B K,Dr.Yadavalli Basavaraj, “Evaluation of occupant head injury during automative interior head impact using FEM approach ”, Has Been Published In The International Journal Of Science and Reaserch, Volume 3, Issue 6, Page.No. 709-711, june 2014
2014-15
1	ShivaramaKrishna A, Dr.Yadavalli Basavaraj “Fracture Characterization and FE Simulation of Glass Fiber Reinforced Polystyrene Hybrid Polymer Composite.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

    Publications Of Mr.Mabusab

2013-14
1	Dr. V. Ravi & Prof. Mabusabu, “A Study on Heat Transfer Characteristics Of Ethylene Glycol based nanofluid And Carbon Nanotube (CNT) Mixture In Nucleate Pool Boiling”, International Journal of Mechanical Engineering Research & Applications (IJMERA), ISSN: 2347-1719, www.ijmera.org, Vol. 1 Issue 4, September – 2013.
2014-15
1	Shekar K, Shreeharsha B T, Fayaz “Augmentation of Nucleate Pool boiling heat transfer characteristics of water-ethylene glycol (EG)-Carbon Nanotube (CNT) based nanofluids – A Critical Review and Future Directions.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Manjunath E

2014-15
1	Manjunatha E, Santosh , Shivakumar “Development of polymer nanocomposite with Different polymeric matrices.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Santosh Janamatti

2014-15
1	Manjunatha E, Santosh , Shivakumar “Development of polymer nanocomposite with Different polymeric matrices.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

  Publications Of Mr.Shivakumar S Y

2014-15
1	Manjunatha E, Santosh , Shivakumar “Development of polymer nanocomposite with Different polymeric matrices.”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Santosh Diwatar

2014-15
1	Santosh Diawatar, Pooviarasan “Validation and centralizing the data processing unit of a manufacturing setup using simulation .”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.Pooviarasan

2014-15
1	 Santosh Diawatar, Pooviarasan “Validation and centralizing the data processing unit of a manufacturing setup using simulation .”, Has been Published In The National conference on Mechanical Engineering Trends COMET-2015, February 2015

Publications Of Mr.H M ANILKUMAR

2013-14
1	H M Anilkumar, “An overview of friction stir welding(FSW): A New Perspective”, Has Been Published In The International Journal Of  Engineering and Science, Volume 4, Issue 6, June 2014
2014-15
1	H M Anilkumar, “Realizing concurrent engineering in product development: A survey on two wheeler auto industry”, Has Been Published In The International Journal Of Advanced Technology in Engineering and Science, Volume 3, Issue 6, March 2015

Publications Of Mr.K MALLIKARJUNA

2013-14
1	K.Mallikarjuna, V.Veeranna and K. Hemachandra Reddy, “Design of loop layout with integrated batch scheduling in flexible manufacturing system: An approach of stochastic heuristics”, Has Been Published In The International Journal Of Artificial intelligent systems and machine learning, Volume 5, Issue 1, January  2013
2	K.Mallikarjuna, Rajashekar Patil, Naveen Kumar H.M, Hanumantappa S, “Performance of heuristicmethod over traditional method for solving the job sequencing problem”, Has Been Published In The International Journal Of Engineering Research & technology, Volume 2, Issue 6, June  2013
3	K.Mallikarjuna, K. Hemachandra Reddy, V.Veeranna, “Optimization of loop layout in flexible manufacturing system with scheduling constraits- An approach of evolutionary algoriyhm and trajectory based method”, Has Been Published In The International conference on computational intelligence & advanced manufacturing system, Volume 1,  2013

 

List of Five Best and Average Projects List of the activities carried out under the Mechanical Engineers Forum

  S.No	  Professional Activity/Event	  Event Dates
1.	A Cognitive programme on Flexible Manufacturing System for MSME’s	5th March 2016
2.	6 Days FDP on Analysis of real time engineering problems using Ansys.	18th-23rd January 2016
3.	Inauguration and one day workshop on Flexible Manufacturing system	19TH SEP 2015
4.	VTU-VGST sponsored 4days FDP on Process quality through optimization techniques and waste utilization in steel manufacturing.	20th -23rd May 2015
5.	3rd  National conference on MECHANICAL ENGINEERING trends	20th and 21st  Feb 2015
6.	Industrial Visits by our 8th Sem ME students to JSW Steels, Toranagallu, Bellary.	12th  Feb 2015
7.	One day workshop on “DOMAIN KNOWLEDGE AUGMENTATION IN MECHANICAL ENGINEERING”	6th May 2014
8.	INDO-US ROBO LEAGUE- International Robotics Competition and Workshop Series.	12th and 13th March 2014
9.	One day Seminar on “Space Craft Mechanical & Thermal Control Systems”	8th March 2014
10.	Mechanical Engineers Forum has organized Coins and Stamps Show of various Countries.	20th, 21st and 22nd August 2013.
11.	Technical talk by Mr. Naveen J.C from BTPS, and Mr. Shadab Khan from JSW on “Fundamentals of Power plant Engineering and Erection and Commissioning of Power plants”	28th April 2013
12.	Industrial Visits(Thermal Power plant) by our 5th Sem ME students to JSW Steels, Toranagallu, Bellary.	13th & 14th Sep 2012
13.	Industrial Visit by our Pre-Final year students to Nava Karnataka Steels, Anathapura Road, Bellary.	13th & 14th Sep 2012
14.	3-Day Faculty Development Programme on “Statistics for Industrial and Research Applications”	3rd Nov 2011 to 5th Nov 2011
15.	ROBOTRYST-2012, Zonal workshop on I- Robotics	22nd & 23rd Oct- 2011
16.	A National Work shop on “Vibration and Condition Monitoring of Rotating Machines”	30th Sep an 1st Oct 2010
17.	A Seminar on “Success at college to success at work – A transition” by S.S.Bhaskar, Senior Program manager, Microsoft India,Hyderabad	27th Sep 2010
18.	Training on “ Creative Brain Power Development” by Dr. R. Sethumadhavan, Programme Director, Rural Entrepreneurship Management Project, Hindupur	14th August 2010
19.	Industrial Visit to Bramhani Steels, Rayalaseema Thermal power Project, Bharathi Cements	27th & 28th Feb 2010
20.	National Conference COMET -2010	19th & 20th Feb 2010

Tech Programme in Design Engineering

Basic Eligibility

The eligibility criteria for pursuing a master’s degree are holding a bachelor’s degree in (B.E/B.Tech) in Mechanical Engineering or any other equivalent branches of engineering. The duration for the course is 2 years.

Scope & Opportunities

Design Engineering is one of the top most career choices made by students in India. There are a lots of career opportunities in this field for young aspirants. Graduates from this field are mainly employed in manufacturing firms. Design engineers can seek employment in private or public sector industries of various types. They can also find job in government departments such as CPWD, defense, PWD, posts and telegraphs. Other sectors such as electronics, chemical, power plants, steel plants, agricultural, space research institutes, automobile and aeronautical as well as the railways, need Design engineers to design and maintain their machinery.

Candidates with postgraduate degree or with additional management degree can find work in executive and managerial positions. In agricultural division, design engineers play a major role by design of elements of pump sets, tractors, electric motors, oil engines and other agricultural equipments. Candidates who are interested in research activities can work with many public/private sectors research organizations. Professionals in this career can also opt for teaching jobs in universities and colleges. Postgraduate students with experience can also seek employment in abroad countries.